What's the difference between "squash" and "fixup" in Git/Git Extension?

What's the difference between "squash" and "fixup" in Git/Git Extension?

I've been using Git Extensions for a while now (it's awesome!) but I haven't found a simple answer to the following:

Sometimes, when typing a commit message, a make a typo. My friend showed me how to fix it the following way (in Git Extentions):

Right-Click on the commit > Advanced > Fixup commit

Then I simply check the box "Amend" and rewrite my message and voila! My commit message is fixed.

However this other option "Squash commit"... I have always wondered what it does?!

My question is:

Would someone simply explain me what is the exact difference between Squash commit and Fixup commit in Git/Git Extentions? They look kind of... "similar" to me:

I do not know what Git Extensions does with it specifically, but git rebase has an option to automatically squash or fixup commits with squash! or fixup! prefixes, respectively:

   --autosquash, --no-autosquash
       When the commit log message begins with "squash! ..." (or "fixup!
       ..."), and there is a commit whose title begins with the same ...,
       automatically modify the todo list of rebase -i so that the commit
       marked for squashing comes right after the commit to be modified,
       and change the action of the moved commit from pick to squash (or
       fixup).

The difference between squash and fixup is that during the rebase, the squash operation will prompt you to combine the messages of the original and the squash commit, whereas the fixup operation will keep the original message and discard the message from the fixup commit.

Simply put, when rebasing a series of commits, each commit marked as a squash, gives you the opportunity to use its message as part of a pick or reword commit message.

When you use fixup the message from that commit is discarded.

If the question is what's the difference between squash and fixup in git when doing git rebase --interactive, then the answer is the commit message.

s, squash <commit> = use commit, but meld into previous commit

f, fixup <commit> = like "squash", but discard this commit's log message

---

For example:

pick 22a4667 father commit message
squash 46d7c0d child commit message # case 1
# fixup 46d7c0d child commit message # case 2

The commit message after rebasing in case 1 would be:

father commit message

child commit message

while the commit message in case 2 is:

father commit message
# no sub messages

From git-rebase doc, "interactive mode" section:

If you want to fold two or more commits into one, replace the command "pick" for the second and subsequent commits with "squash" or "fixup". If the commits had different authors, the folded commit will be attributed to the author of the first commit. The suggested commit message for the folded commit is the concatenation of the commit messages of the first commit and of those with the "squash" command, but omits the commit messages of commits with the "fixup" command.

Both squash and fixup will allow code changes to be introduced by their respective diff's. (not normally mentioned)

The distinction between squash and fixup is in how the commit messages are treated.

In the fixup case the original commit message is kept, unchanged, and any text within the fixup commit message is ignored (unceremoniously dumped).

In the squash case both commit messages are combined ('melded'), one after the other, and offered to the user's editor, so that they can be amalgamated/fused together as desired by the user.

The initial combined message (squash) will contain comment marks showing where the messages start and end. Multiple squash and fixups can be applied.

The terminology can be confusing when discussing small code corrections (without need to change the message) as often one may suggest that the code is 'squeezed' in, when a squash isn't actually required.

I tinkered with git extensions and couldn't get it to squash many commits into one. To do that, I had to resort to the command line and found this post helpful

git rebase -i Head~2

This is interactive rebase, and note the following:

• ~2 here refers to how many commits you want to involve in this operation, including the current head
• You have to edit the subsquent interactive edit window, leave the first item as "pick" and replace subsequent lines with "squash". The instructions in the link above are much clearer if this is opaque.

Why not ask git itself? When you rebase with git-bash, it says:

pick 512b1d7 (some comment)
# Rebase 621b2e4..512b1d7 onto 621b2e4 (1 command)
#
# Commands:
# p, pick <commit> = use commit
# r, reword <commit> = use commit, but edit the commit message
# e, edit <commit> = use commit, but stop for amending
# s, squash <commit> = use commit, but meld into previous commit
# f, fixup <commit> = like "squash", but discard this commit's log message
# x, exec <command> = run command (the rest of the line) using shell
# d, drop <commit> = remove commit
# l, label <label> = label current HEAD with a name
# t, reset <label> = reset HEAD to a label
# m, merge [-C <commit> | -c <commit>] <label> [# <oneline>]
# .       create a merge commit using the original merge commit's
# .       message (or the oneline, if no original merge commit was
# .       specified). Use -c <commit> to reword the commit message.
#
# These lines can be re-ordered; they are executed from top to bottom.
#
# If you remove a line here THAT COMMIT WILL BE LOST.
D:/code/fenixito-legacy-api/.git/rebase-merge/git-rebase-todo [unix] (11:57 23/10/2019)                                         1,1 start
"D:/code/xxx/.git/rebase-merge/git-rebase-todo" [UNIX] 27L, 1170C

So you see:

s, squash = use commit, but meld into previous commit

f, fixup = like "squash", but discard this commit's log message

In addition to previous answers I wanted to highlight the new options that can also be used with fixup that further differentiate it from using squash.

I am using git version 2.32.1

---

Lets imagine you are rebasing a branch called my-new-feature onto main. In order to do this you are doing an interactive rebase using the command git rebase -i main whilst you have the my-new-feature branch checked out.

(If you are using a GUI for git like the OP is using Git Extensions, if they are up to date they should also contain these new options)

Running git rebase -i main opens the following in your editor:

pick 996b0 work in progress
pick 59f3a feature finished

# Rebase b6914..59f3a onto b6914 (2 commands)
#
# Commands:
# p, pick <commit> = use commit
# r, reword <commit> = use commit, but edit the commit message
# e, edit <commit> = use commit, but stop for amending
# s, squash <commit> = use commit, but meld into previous commit
# f, fixup [-C | -c] <commit> = like "squash" but keep only the previous
#                    commit's log message, unless -C is used, in which case
#                    keep only this commit's message; -c is same as -C but
#                    opens the editor
# x, exec <command> = run command (the rest of the line) using shell
# b, break = stop here (continue rebase later with 'git rebase --continue')
# d, drop <commit> = remove commit
# l, label <label> = label current HEAD with a name
# t, reset <label> = reset HEAD to a label
# m, merge [-C <commit> | -c <commit>] <label> [# <oneline>]
# .       create a merge commit using the original merge commit's
# .       message (or the oneline, if no original merge commit was
# .       specified); use -c <commit> to reword the commit message

Note the new -C | -c flag.

s, squash = use commit, but meld into previous commit

f, fixup [-C | -c] = like "squash" but keep only the previous commit's log message, unless -C is used, in which case keep only this commit's message; -c is same as -C but opens the editor

---

Looking at our 2 commits:

pick 996b0 work in progress
pick 59f3a feature finished

Let's imagine you want to meld them together (something which can be done with squash or fixup) but you want to only keep the helpful commit message of the second commit feature finished.

---

Using fixup as we have in the past like so:

pick 996b0 work in progress
f 59f3a feature finished

will not do what we want. It will meld the commits together but it will leave us with the work in progress commit message, which is not very helpful.

---

We could use squash like so:

pick 996b0 work in progress
s 59f3a feature finished

this will open a new editor which will allow you comment out the first commit message manually and persist the feature finished commit message. This does work but it forces you to have an extra manual step; aint nobody got time for dat

---

This is where the new option we can pass to fixup is super handy.

pick 996b0 work in progress
f -C 59f3a feature finished

This will meld the commits together but discard the work in progress commit message and only keep the feature finished commit message.

---

These new options make fixup even more powerful and allows you to rely even less on using squash when you don't need to.

ReferenceURL : https://stackoverflow.com/questions/16758131/whats-the-difference-between-squash-and-fixup-in-git-git-extension